New workbench

Finally got around to starting on building a new workbench in the garage last weekend. It’s a simple workbench built from 8 foot long 2x4s and 2.5″ deck screws.

My original plan was to make the workbench 6 feet long, but it fit into the space pretty nicely at 8 feet long, so I just went with that. Two fewer cuts to make too.

Took a few hours to lay things out, cut and screw everything together. Out on the driveway it seemed a bit on the wobbly side, but once I got it into the garage, it was fine. The workbench was mostly level too. Had to adjust a couple of the legs to make them flush with the top but that was an easy task.

New workbench
New workbench

Pretty happy with the way it turned out so far.

For the top of the workbench, I was initially thinking plywood but I think I’m going to go with 8 foot long 1″x12″ boards. 4 of them will go along the top nicely leaving a good sized lip for clamping things to. The boards will be easier to transport in the car too.