Atari 2600 progress

After replacing the voltage regulators and several capacitors on the Atari 2600s, one of them is back in operation!

Pac-Man on the Atari 2600
Pac-Man on the Atari 2600

Out of the 18 cartridges I have, half of them worked (were playable) when I plugged them in. The others just gave me squiggly lines or just a black screen. Not sure if it’s an issue with the cartridges or the cartridge slot.

Still lots of work to do on the consoles. The other console only got a quick check with a couple cartridges, so I’m not sure if it’s working yet. The switches on both of them are a bit finicky so I’ll probably have to take them out for cleaning/refurb. I don’t think any of them will need to be replaced though. The cartridge slot seemed a bit touchy too, but looking into that will be a bit more work I think.

After that I’ll tackle the controllers. There are a few of them to work on. I’ve got 5 Atari and 5 third party joysticks plus a pair of paddles. The one joystick I tried mostly worked, although it wasn’t very responsive when pushing the stick in the down direction.

One Reply to “Atari 2600 progress”

Comments are closed.