French Press coffee Mah way

It’s not difficult to find tutorials online for making French press coffee. I’ve tried a few, and settled on this method. It makes a cup that I enjoy black, or with a splash of cream.

My French press comes from IKEA, a 16 oz press (or a 32 oz press, depending on how caffeinated I want/need to be). You can find fancier ones out there, but these were reasonably inexpensive and do a perfectly good job.

Small (16 oz) on the left and Biggie (32 oz) on the right
Small (16 oz) on the left and Biggie (32 oz) on the right
New 16 oz Clemson alumni mug for scale.
New 16 oz Clemson alumni mug for scale.

I like to use an electric kettle to cook my water. Cooks the water quickly, pours nicely, and the one we have holds just enough water to fill the big press. Get one with an automatic shut off feature.

Electric kettle for cooking the water.
Electric kettle for cooking the water.

Most French press recipes call for very coarsely ground coffee and long brewing times. Since I don’t want to deal with having to adjust my grinder whenever I want to brew with the French press or Aeropress, I go with the same medium-ish grind that I use with the Aeropress. The grind size is pretty close to what you’d use for a regular drip coffee machine. I’ve found that one very heaping Aeropress scoop (17 grams or about 3 tablespoons) of coffee (double that if I’m using the big press) makes a cup of coffee that I like.

17 grams of ground coffee (about 3 tablespoons)
17 grams of ground coffee (about 3 tablespoons)

Dump the coffee into the press and add a tiny dash of salt (something I picked up from a Good Eats episode). I find it helps enhance the coffee flavour but doesn’t make it salty (unless you add too much).

Coffee into the press with a dash of salt.
Coffee into the press with a dash of salt.

Add water to about the top of the metal band, give it a bit of a stir, and put the press part on. I like to push the press down a bit so that all the grounds are submerged. Let it sit for about 3 minutes. Set a timer if you like.

After the brewing time, press the grounds all the way to the bottom, and gently pour into your coffee receptacle of choice.

Press the grounds and pour.
Press the grounds and pour.

The press uses a fine metal mesh to filter out the grounds, but really fine particles will still get through. Towards the end, I slow down the pouring and leave a bit in the press so that I’m not pouring all the fine stuff into my cup. That will help reduce the amount of sludge at the bottom of your cup. If you pour too quickly, the grounds get stirred up and you’ll end up with a bunch of sludge at the bottom of your cup. If you like sludge, then pour however you like.

Enjoy your coffee!
Enjoy your coffee!

Drink straight up, or doctor it up however you like.

Life in the time of COVID-19

Life for a lot of people has changed pretty drastically over the past few weeks as the COVID-19 virus takes hold in the US. Several states have enacted “Stay home” emergency directives, while others like South Carolina are trusting its residents to maintain social distancing. Based on what I’ve seen on the news and the few times I’ve had to venture out to shop, that seems overly optimistic.

A few weeks ago, my wife had us start monitoring our body temperatures twice a day, which seemed like a good idea. Then a few days later work issued a mandatory requirement for all employees and students to start self-monitoring for COVID-19 symptoms. Monitoring for symptoms at least gives people a window of time to figure out where and when they might have been exposed. I’m lucky to have a wife who’s so proactive and stays on top of things like this.

On my end of things work has encouraged anybody who can work from home to do so. Although the majority of my work can’t be done from home, I took advantage of being able to work from home to get caught up on writing up reports that should have been done a few months ago, but got put on the back burner so that I could get caught up on the equipment testing. Now that I’m finally caught up on the reports, I can move on to start getting caught up on other things like the mandatory annual training modules and earning more continuing education credits (didn’t get many last year because of being so busy and I’m starting to run low).

After discussing the equipment testing situation with my colleagues at work, I also decided to temporarily suspend the regular equipment testing to reduce the chance of me transporting COVID-19 around work and also to reduce my risk of exposure. It will mean scrambling to get caught up later when things start getting back to normal (whenever that ends up being), but I felt it was a prudent thing to do.

With a reduced work workload and working more from home, I now have the opportunity to spend more time on my PhD work. With the majority of my Monte Carlo simulations completed, I’ve been going through the data and doing some analysis on it. Now I can spend more time doing that and start writing up my results. I have until September or October to cobble my thesis together, and that time will no doubt go more quickly than I want.

Song obsessions

Every now and then my brain gets fixated on a particular song at a level that goes way beyond ear worm. It gets embedded in there and my brain keeps stirring it up the way one might absent-mindedly fidget with a pen, or twiddle a lock of hair.

The latest one is Sound of Silence by Simon and Garfunkel, probably partly triggered by my post-DST tweet.

It’s been on a pretty much non-stop loop in my brain all week.

Fortunately it’s a song I don’t mind and it hasn’t driven me crazy yet.

While listening to the Simon and Garfunkel version on Youtube, I came across this pretty awesome cover version by the heavy metal group, Disturbed.

One possible reason my wife offers for the continued looping in my brain is that since Sound of Silence doesn’t really have a firm definite ending, my brain keeps replaying it trying to end it. Seems plausible.

At some point, probably in a few more days or so, the song will fade and my brain will find something else to fixate on. In the meantime, here’s another cover version by Pentatonix.

Merry Christmas!

Hoping everybody has a great Christmas!

Merry Christmas 2019
Merry Christmas 2019

Looking forward to what 2020 brings.

Front yard rocket launch watching

It’s not often people in South Carolina can see a rocket launch, but the Atlas V launch trajectory for Boeing’s uncrewed Starliner test took the rocket over the Atlantic ocean along the US East coast this morning making this launch visible to a lot of people.

Most launches from Cape Canaveral head east out into the Atlantic, so this one was a bit different and made for an exciting early morning show.

We were watching the live stream of the launch on the phone, so when the Atlas V lifted off, we started scanning the skies. We were looking towards the east-southeast when a couple minutes after the lift-off, I looked over to the south and saw the exhaust trail of the rocket.

It was a pretty impressive sight to see something streaking across the sky that quickly.

Boeing uncrewed Starliner launch
Boeing uncrewed Starliner launch

We followed the rocket along until after the Centaur stage separated (I think that’s what it was) and it faded into the glow of the rising sun.

Atlas V exhaust plume from the Boeing uncrewed Starliner launch
Atlas V exhaust plume from the Boeing uncrewed Starliner launch

Unfortunately, some issues with the Starliner’s orbit insertion left it in an unsuitable state for meeting up with the ISS, but it’s still in orbit and I’m sure they’ll spend the next couple days running all kinds of tests before its scheduled landing in New Mexico on Sunday.