New kit: Etherprog by @NT7S

I received a new kit from Jason/@NT7S in the mail yesterday.

It’s a small little kit called EtherProg. Documentation is somewhat sparse, consisting of a circuit schematic, bill of materials and some source code.

I’m not entirely sure what it does yet, but there’s an ATtiny85 microcontroller in the middle of it. That and the source code tells me it’s something programmable or a programming interface for other projects.

Sure, I could ask, but I think it will be more fun to put it together and try to figure it out for myself.

Then I’ll ask.

Breadboard power

Spent a couple hours putting together the two breadboard power supply kits while I was waiting for laundry to get done.

Soldered all the pieces into place and worked on refining my technique. I think I’m starting to get better at it now. Still looks a little messy, but it’s not quite as blobby as when I first started. Managed to not burn myself either.

Two power supply modules for breadboards.  One module has a USB-B connector, and the other module has a 2.1mm DC power barrel jack connector.
Power supply modules for breadboards

Grabbed a USB A/B cable off the scanner (closest one available), plugged the B side into the power supply and…nothing.

Crap, I did something wrong putting it together.

Then I realized the other end wasn’t plugged into anything. Plugged the A side into the computer and I was rewarded with an LED light coming on!

The USB power supply works perfectly. Measured pretty close to the 5 and 3.3 V it’s supposed to put out. I need to find a suitable wall wart for the other one. The closest handy one I had (used for the cradle for my Tungsten T3) only puts out 5V/1A. It gave me just under 3V, but didn’t change when I switched to 5V. Think I’ve got a few more wall warts around that will put out the 6-12 V the power supply wants. Just need to hunt them down.

Now to find some projects to make use of them.

More soldering XPs!

Refurbishing antenna analyzers

While browsing radios on ebay, I came across a couple of MFJ antenna analyzers: an MFJ-207 and MFJ-208.
They were both being sold as “For parts” and the person selling them wasn’t able to test them. From the description and the pictures that were posted, my expectations weren’t very high. The price was pretty low, and I figured if they worked I’d have a couple of antenna analyzers for pretty cheap and if they didn’t, I’d have an interesting project on my hands that I could learn something from.
They arrived in the mail today and I had a quick look inside both of them. Off the bat the 207 is going to need a new band selector dial. It looks like it’s supposed to be a one of those multi-position switch knobs, but if it was it isn’t anymore. On the 208 it looks like a new variable plate capacitor is in order. I’m no expert but I’m pretty sure the plates aren’t supposed to touch when the knob is turned. I’ve also never seen a variable plate capacitor with just two plates (one moving, one stationary).
I’ll have to spend more time and go over them more closely, but if these two things are all that’s wrong with the two analyzers, then this should be a pretty easy refurb project for me (provided I can find the parts). Fortunately the manuals for both of them are available on the MFJ website, and the 207 manual even has a schematic in it.
This should be interesting. Pictures to follow

Kit building frenzy

The guy at my local Radio Shack is starting to recognize me.

RS Guy: “Hello, back for more stuff?”

Me: “Yep, back for more bits.”

After whetting my appetite for electronics (again) and soldering with the Morse code key and its breadboarded cousin, I’ve added a couple more kits to work on and practice my soldering with.

Both are small, simple breadboard power supply kits from Sparkfun. Haven’t started assembling them yet, but they’re pretty easy. The components and pieces are smaller though and it’s a much smaller board to work with. Now that I know a little more about soldering, they’ll be good projects for me to practice on. The kits will provide power for future breadboard projects I work on (provided I don’t cook anything in the process of soldering).

A tip from Andrew/AC8JO let me to the SDR radio kits at Five Dash. After a bit of consideration, I decided to get the Softrock RXTX and Softrock Lite II kits. Not sure what frequency band i’ll build them for, but I can decide that later.

I’ll need to gain a few more levels in soldering and pick up an SMT soldering subspecialty before I tackle the RXTX kit. The Softrock Lite II I think I can make with a little more soldering practice.

Radios: What do I want to get?

Amateur radio isn’t exactly an inexpensive hobby to get into. New base stations generally start in the $1-$2k range and go up from there. Portable/mobile radios a little less, usually in the $700-$1k range. There are a myriad of choices and sources available: new, used, vintage, auction sites, ham radio forums, hamfests, local users. For less $ and some elbow grease, you can still go the DIY route with a kit radio (a very intriguing idea). If you don’t know what you’re looking at or looking for, it can be pretty overwhelming.

Amateur radio equipment tends to be very modular, so it’s not just the radio you need. There’s also the power supply (another couple of hundred dollars), an antenna (or two, or three…how many bands do I want to play on?), and various and sundry accessories like filters, antenna tuners, maybe an amplifier and other things. It’s kind of like buying a car, and having to purchase the engine and tires separately. Most of the accessories can be acquired over time as the need for them arises, but the three basics are the radio, power and antenna.

I’ve been doing a lot of reading and a lot of browsing on ebay and swapmeet sections on various ham radio forums to get an idea of what’s out there and what’s available. I’m slowly starting to put together a list of what kind of gear I want.

I’m pretty sure I’m going to want at least two radios: a portable one for the car and a permanent station for the house. I’ll probably start with a mobile unit first. A third mobile/portable unit that I could take out and about with me without having to connect and disconnect what’s in the car would be nice too. That will probably be further down the road though. Both radios should be able to do HF/VHF/UHF, although I might consider VHF and UHF operation optional for the portable radio since I have my handheld.

As for specifics, I’m not partial to any particular manufacturer or brand. I think something new-ish so I don’t have to worry about it dying on me due to old age. There are some really neat looking old rigs up for auction on ebay that are tempting though. I don’t think I want to buy anything used online though. I’d much rather be able to play with it and see the radio in action beforehand, or know that the radio was actively used by the owner.

I’m not in a huge rush to get a radio just yet. This is the kind of thing I want to take my time researching and figuring out just what I want out of a radio set up. In the meantime, I’ll spend my time learning more about radio and getting more skill levels in electronics.